Maintenance 10
• Changing Blades:
The Diamond blade (MIN016) and Tungsten
Carbide Blade (MIN012) will require step-
washers.
If required, place step washer on small pulley
(shown in fig.12 and 13), and as shown in the
individual accessory fitting instructions.
• Blade sharpening:
1. Unplug the Mini Grinder.
2. Use a (3/16´´) or 4 mm round metal file
(MIN003). When sharpening hold the file at 90
0
to the blade, keeping the file level.
(as shown in fig.14)
• Checking adaptor plate
Ensure that the Mini-Grinder adaptor plate is
always mounted securely. If loose, tighten the
three adaptor plate screws as shown in fig.15.
Fig.12
Fig.13
Fig.14
Fig.15
90
o
Sharpening Angle
Komentáře k této Příručce